pcb 4xrf, 32 filtered dclines + 4 RFsma + 4 biastees
size:
more info |
bottom side
size:
|
pcb's fb001a/001b rf-readout LC
 |
pcb switchjunction+CuPowderfilters
 |
QDCAR2 dc-lines + rf-gate
size: 14.3 by 12.5 mm. thickness: 0.25mm
|
QDCAR2b dc-lines + bias-tee on rf-gate
size: 14.3 by 12.5 mm. thickness: 0.25mm
|
QDCAR3 dc-lines + rf-gate
size: ? by ? mm. thickness: 0.25mm
|
QDCAR4b dc-lines + 2 rf-Gates
size: ? by ? mm. thickness: 0.25mm
|
cryogenic Bias-Tee 5Hz-2.5GHz (gate)
size: ? by ? mm. board thickness: 0.8mm
side view circuit |
cryogenic Bias-Tee
size: ? by ? mm. board thickness: 0.8mm
|
cryogenic Bias-Tee risetime 46pS
size: ? by ? mm. thickness: 0.8mm
 
|
sample holder ("cold finger") with
32 wire&grounding connector
 
|
sample holder (on attocube in cryostat) with
2x10 pin
  
|
sample holder optics carluc1, dc+2rf (SMA)
  |
sample holder optics hannes, dc+4rf (SMC)
 |
Microwave sample carrier (Pieter) ceramic substrate TMM10,
smp-connectors
|
Microwave sample carrier (Patrice) ceramic substrate TMM10
document by Patrice Bertet
on TMM10 
|
CARDIAM1 holder square glass diamant NVsample
, roomtemperature
thickness: 3.2mm, cutout for objective, transmission
lines to sample
 
|
CARAD1 for microwave resonator,
size: ? by ? mm.
thickness: 1.6mm, partial cutout for chip
picture, pcb mounted in cryostat
 
|
CARHAN1 12 pulse line connections
size: ? by ? mm. thickness: 1.6/0.8 mm,
 |
CARAFM1 afm-sample holder
size: ? by ? mm. thickness: 1.6mm, cutout for sample
 
|
CARUMB1 sample holder, backgate-electrode
size: ? by ? mm. thickness: 1.6mm
|
PDETCAR1 single photon det. carrier SMA
size: 20mm circ. thickness: 1.6mm
|
PDETCAR3 single photon 2det. carrier SMA
size: 30mm circ. thickness: 1.6mm
|
FBW socket+connector
size: ? by ? mm. thickness: 1.6mm
|
RABCAR2 SMA connectors, rf-resonance in/out/ +microwave
size: 23.7 by 22.4 mm. thickness: 1.6mm, cutout for sample
|
RABCAR3 SMA connectors, rf-resonance in/out/ +microwave
size: 23.7 by 22.4 mm. thickness: 1.6mm
|
cryogenic RC+RC filter for sample wires
size: ? by ? mm. thickness: 1.6mm
measured filtercurve
in 1Mohm load
pcboard topview
pcboard bottomview
rc-values example1
rc-values example2
|
cryogenic RC+RC filter for sample wires (rc400ha)
size: ? by ? mm thickness:
|
cryogenic RC+RC filter for sample wires (rc12han2)
size: ? by ? mm thickness: 
|
cryogenic RC+RC filter for sample wires (rcsergey1)
size: ? by ? mm thickness:
|
cryogenic RC+RC filter for sample wires
size: ? by ? mm thickness:
|
CARTEM3 holder for sample TEM-microscope
size: ? by ? mm. thickness: 0.8mm
|
commercial adaptor boards
thickness: 1.6mm
60pin
24pin
44pin
32pin
24pin
|
